top of page
bg-benner-article-2.jpg

EG-8025 Full electronic control servo CNC press brake


INNO EG-8025 Full electronic control servo CNC press brake
INNO EG-8025 Full electronic control servo CNC press brake

Product Featuress



Product Featuress of EG-8025 CNC press brake
Product Featuress of EG-8025 CNC press brake

High precision, smooth operation, high efficiency, energy saving. Reduce electricity consumption to below 50%, reduce actuating oil volume by 100%.


Dual-cylinder synchronous control system, integrated with a dual-servo closed-loop system, is structurally stable with high control precision, ensuring high bending accuracy and repeat positioning precision.


Servo motors, high-precision ground ball screws, drive the upper and lower worktables to achieve precise bending angle calculations. When the worktable is paused, the main servo motor's power consumption is in an idle state, achieving ultra-low energy consumption and noiseless operation, thereby providing environmental protection, energy efficiency, and high safety.


The EG series all-electric servo press brake adopts advanced Japanese technology, offering reliable performance, attractive appearance, low failure rate, and low maintenance costs. It is widely used in industries such as aviation, automotive, marine, electrical appliances, machinery, communications, elevators, air conditioning, kitchenware, lighting, medical equipment, energy storage, new energy, complete equipment, and light industry.


High presure high-precision transmission structure
High presure high-precision transmission structure

Ultra long positioning stroke
Ultra long positioning stroke

High working opening height
High working opening height

Inlet guide rail slider mechanism
Inlet guide rail slider mechanism



Equiment Accuracy

Equiment Accuracy data of EG-8025
Equiment Accuracy data of EG-8025

Technical Parameters

Technical Parameters of EG-8025
Technical Parameters of EG-8025

System Integration


Host Structure


  • On both sides of the machine body, there are C-shaped plates with high-precision magnetic scales mounted on them, thus avoiding the impact of body deformation during bending on bending accuracy.


  • The left and right side plates, upper crossbeam, lower bed, and crossbeam are welded into a frame, providing excellent strength and rigidity.


  • Through rigorous heat treatment to relieve stress and eliminate welding internal stress, the bed has high precision and good stability.


  • A CNC floor-type boring and milling machine is used for precision machining in a single processing step to ensure machining accuracy.


Control System


EG-8025Press Brake Control System
EG-8025Press Brake Control System
  • Equipped with high-performance servo system and Japanese Mitsubishi controller system, the INNO fully electric standard CNC system.


  • Powered by three-phase AC power, control circuit voltage is provided by an electrical control transformer.


  • All major electrical components are top-line brands, ensuring safety, reliability, stable quality, easy parts availability, and convenient replacement.


  • 15-inch industrial-grade touchscreen: color LED, 1024*1600 pixels, controllable LED backlight, memory: SRAM.


  • Digital signal output: 12 channels with short-circuit protection, 24VDC source output mode. Maximum output current 0.5A.


  • 2GB operating memory (4-core high-speed), industry-leading powerful processor.


  • Utilizes full-graphic programming to achieve angle programming, electronic handwheel debugging programming, and direct programming in three modes, making it simple and easy to use.


Quick Clamp Intermediate Plate


AMADA equivalent double-sided tool holder (standard)
AMADA equivalent double-sided tool holder (standard)
WILA hydraulic tool holder (optional)
WILA hydraulic tool holder (optional)
  • The upper and lower dies can be installed by multiple short dies joined together or as a single long die, featuring high precision, good interchangeability, and ease of installation and folding.


  • They are fully compatible and interchangeable with the bending machine dies produced by the Japanese company AMADA.


Rear Positioning System(Six-axis Series)


INNO Rear Positioning System(Six-axis Series)
INNO Rear Positioning System(Six-axis Series)

Multi-step automatic Rear Positioning System. Both the front and rear (L-axis) and the up and down (Z-axis), as well as the independent movement of multiple backgauge fingers left and right, can all be automatically controlled (Z1 axis and Z2 axis), ensuring precise positioning without any repeated positioning errors or cumulative errors.




Contact us

Please contact us through the following ways.

Wechat QR Code

img-QR-wechat.png

Cell phone

+86-13711472417

E-mail

Whatsapp QR code

img-QR.png
bottom of page